DLC Load Controllers
Fixed Load Controller
When a PSI-10 Wall Mount or E-10 Duct mounted sensor detects the presence of VOCs, a signal is sent to the load controller. The Fixed version of the load controller sends a signal ideal for controlling a device like an exhaust fan. This is available hardwired or with plug-type outputs.
Variable Load Controller
The Variable load controller will send a TTL signal based on the levels of the VOC present. This might be used to control an Ozone Generator with a Fast, Slow, and Standby mode. This is available hardwired or with plug-type outputs.
Dual, Two Channel Load Controller.
This would be used with a device such as an exhausted ozone purification system. One channel (Fixed) controls the fan while the other channel (Variable) controls the ozone generator. This is available Hardwired only.
Slave.
In an installation where one sensor controls multiple air handling or purification devices, a master/slave configuration is available. In this case, each slave can be adjusted for different levels of control such that one fan will be running at full speed and another at 75% speed.
PSI-DLC LOAD CONTROLLER
| SIZE |
4.2 (106-7) x 4.0 (102.0) x 2.5 (63.5) |
| CASE |
.06 (1.52) Painted aluminum |
| OUTPUT TYPE |
Triac controlled AC voltages |
| MAIN OUTPUT |
3 Adjustable setpoints from 50% to 100% input line level |
| AUXILIARY OUTPUT |
On/Off switching of line level |
| Weight |
9 lbs |
| Input |
120/240 VAC 50/60 Hz 1 Watt |
| Signal Input |
3 Channels TTL active low |
| Output current |
3 Amps continuous, 6 Amps peak, 15 Amps available |
| |
|
The PSI-MC Load Controller operates inductive or resistive AC loads up to 114 hp in a variable or fixed mode. Additionally, an isolated solid state switch is incorporated to control loop power systems (eg. 24 VAC). Hardwired and receptacle connections are available as is an OEM version for hidden applications. The OEM controller is epoxy potted inside an ABS thermoplastic housing with many options for connections. Contact factory or local distributor for details.
OPTIONS
- In-duct enclosure
- Protective case
- 4-.20 mA output
- 0 to 5 VOC output
- 12 VAC adaptor w/miniplug
- Duct and wall-mounted sensors
- Custom and OEM models
- Master and slave controllers
|
|
Cabling for connecting the sensor to the DLC Controller 
|
